Global Journal of Engineering and Technology Research (GJETR)
A Hybrid LSTM–Grey Wolf Optimization Framework for Optimal Siting and Sizing of Distributed Generation in Radial Distribution Networks: Evidence from IEEE Benchmark Systems and A Nigerian 33 kV Feeder
Johnson, Owolade Stephen, Ajenikoko, Ganiyu Adebayo, Adesina, Olusegun Bola
3 August 2026 · Vol. 2, Issue 8, pp. 336-342
DOI: 10.65150/EP-gjetr/V2E8/2026-02
Abstract
Electric power distribution networks in developing countries, particularly Nigeria, continue to experience high technical losses, poor voltage profiles, and increasing load demand on ageing, radially configured feeders. Although distributed generation is a proven technical solution to these challenges, its benefits depend heavily on optimal siting and sizing, a problem that is non-linear, multi-objective, and difficult to solve using conventional methods. This study developed and validated a hybrid intelligent framework that combines a Long Short-Term Memory neural network for load forecasting with a Grey Wolf Optimizer for distributed generation placement. The framework was tested on the IEEE 33-bus and IEEE 69-bus benchmark systems and, uniquely, on one hundred and twenty-five days of real operational data collected from the Moniya-Akinyele 33 kilovolt distribution feeder in Ibadan, Nigeria. Load flow analysis using the Newton-Raphson method identified weak buses through a composite priority index combining voltage deviation and loss sensitivity. On the benchmark system, the proposed framework reduced real power losses by 75.3 percent and improved the minimum bus voltage from 0.6746 to 0.6954 per unit following distributed generation installation of 243.88 kilowatts across seven priority buses. On the Nigerian feeder, the forecasting model achieved a coefficient of determination of 0.9667 and a mean absolute percentage error of 3.83 percent using real operating data, substantially outperforming its performance on synthesised benchmark data. The findings demonstrate that combining machine learning-based demand forecasting with meta-heuristic optimisation provides a practical and technically sound approach for intelligent network planning in developing-country distribution systems.
Keywords: Deep Learning, Load Demand Prediction, Moniya–Akinyele Feeder, Power Loss Minimization, Voltage Profile Improvement
Read the full text on Global Journal of Engineering and Technology Research →The full peer-reviewed article and PDF are hosted on the journal's site (the version of record).
Cite this article
Johnson, Owolade Stephen, Ajenikoko, Ganiyu Adebayo, Adesina, & Olusegun Bola (2026). A Hybrid LSTM–Grey Wolf Optimization Framework for Optimal Siting and Sizing of Distributed Generation in Radial Distribution Networks: Evidence from IEEE Benchmark Systems and A Nigerian 33 kV Feeder. Global Journal of Engineering and Technology Research, 2(8), 336-342. https://doi.org/10.65150/EP-gjetr/V2E8/2026-02
@article{Johnson2026,
title = {A Hybrid LSTM–Grey Wolf Optimization Framework for Optimal Siting and Sizing of Distributed Generation in Radial Distribution Networks: Evidence from IEEE Benchmark Systems and A Nigerian 33 kV Feeder},
author = {Johnson and Owolade Stephen and Ajenikoko and Ganiyu Adebayo and Adesina and Olusegun Bola},
journal = {Global Journal of Engineering and Technology Research},
year = {2026},
volume = {2},
number = {8},
pages = {336-342},
doi = {10.65150/EP-gjetr/V2E8/2026-02},
url = {https://doi.org/10.65150/EP-gjetr/V2E8/2026-02}
}Related articles in GJETR
- Climate-Resilient Foundation Design for Coastal Infrastructure Under Rising Groundwater Conditions: A Review
Olukoju, John Ayomide, Oladosu, Micheal Abimbola · Sept 2026
- The Compliance Gap: Why Audit-Based Cybersecurity Models Fail Critical Infrastructure and the Case for Continuous Control
Amadi, Chukwunenye · Sept 2026
- Edge-Optimized YOLO Architectures for Real-Time Autonomous Vehicle Perception: A Hardware-Aware Co-Design Framework
Christian Sankara, Harouna Wendpanga Yann, Oyesiji, Serif Oyindamola, Aalaj, Emmanuel Eniola, Nwakamma, Stanley · Sept 2026
- A Hardware-In-The-Loop CI/CD Validation Framework for IoT and Vehicle Embedded Systems Using C# and Azure Devops
Ndupu, Kingsley Chinazaekpere, Ajala, Emmanuel Eniola, Oyesiji, Serif Oyindamola, Nwakamma, Stanley · Sept 2026
- Predictive Maintenance Metrics in the Minimisation of Non-Routine Flaring from Rotating Machinery Failure: A Review of Condition Monitoring, Prognostics and the Conditional Chain from Early Detection to Avoided Emergency Pressure Relief
Ekelemu, Oghenekaro, Akano, Oluwaseyi Ayotunde, Adikwu, Friday Emmanuel, Amarahobu, Chibuzor · Sept 2026
